WEATHER SENSORS
SPECIFICATION
TECHNICAL CHARACTERISTICS
Highly accurate professional probe, ideal monitoring of environment
No special service
Low voltage and consumed power allow to connect this sensor to wireless sensor node KaipoWave.
Measurement range:
relative humidity
0.100%
temperature 50 .. + 100°C

Resolution:
relative humidity 0,1%
temperature 0,1%
Accuracy:
relative humidity
± 1%
temperature <± 0,1°C for the whole range
Supply voltage: 3V ~ 5V
Supply current: 4 mА

Interface: digital, analog
Connection:
KaipoBase, KaipoRain, KaipoWave
SPECIFICATION
TECHNICAL CHARACTERISTICS
Ideal to measure parameters of hard, liquid and mixed precipitation
Small dimensions. Mechanical part consists of tipping bucket sensor for precipitation measurement.
Measuring part is protected from trash (insects, leaves, etc.), drops, etc.
Resolution: 0,2 mm
Accuracy: ± 4%
Supply voltage: 5 V
Supply current: 0
Interface: switching value
A
Temperature range:
0°C ~ + 70°C
Connection:
KaipoBase, KaipoRain, KaipoWave
No additional calibration. Resolution is 0,2 mm.
Sensor is designed according to the recommendations of the World meteorological organization.
It is necessary to clean the sensor regularly depending on environmental conditions. First, clean the funnel. Next, unscrew the nozzle, clean it and screw again.
SPECIFICATION
TECHNICAL CHARACTERISTICS
Ultraviolet sensor fixes the length of ultraviolet part (causing skin redness because of sunburn).
It allows to measure the level of solar radiation and both daily and accumulated radiation dose.
Diffuser provides accurate cosine characteristic.
Ultraviolet radiation dose:  0,1-19,9 MED
Accuracy: 8% Supply voltage: 3 ~ 5V
Temperature range: - 40 ~ +70°C Interface:
analog Connection:  KaipoBase, KaipoRain,
KaipoWave
SPECIFICATION
TECHNICAL CHARACTERISTICS
It is used to measure intensity of solar radiation and solar energy. Pyranometer is a perfect instrument to use in solar energy applications, calculation of evapotranspiration.
The dispersive element and the body are designed to receive accurate cosine characteristic: silicon photodiode provides sensor sensitivity to solar spectrum; two-part body minimizes radiation heating; convectional
Measurement range: 0..1800W/m2
Accuracy: 4%
Supply voltage:
3 ~ 5V
Temperature range: - 40 ~ +70°C
Interface: analog
Connection:
KaipoBase, KaipoRain, KaipoWave
heating of the sensor prevents ingress of water and dust. Sensors are also used to optimize photoelectric systems.


SPECIFICATION
TECHNICAL CHARACTERISTICS
Highly accurate professional device
Ultrasonic anemometer does not have moving parts so it does not need any technical service unlike the mechanical one.
Ultrasonic wind speed sensor is going to become more economical
Measurement range:
Wind speed 0..60 m/s
Wind direction 0..359°
Measurements: 163 mm x 142 mm
Accuracy:
Speed
± 2%
Direction
± 3%
Supply voltage:
5 ~ 30 V
Interface: RS232
Supply current: 5.5 mA

Temperature range:
-35°C ~ +70°C
Connection: KaipoBase
SPECIFICATION
TECHNICAL CHARACTERISTICS
A sensor to measure horizontal wind direction.
Measured values are transferred as resistance signals (ohm).
Wind direction is defined by wind blade and then transferred to the potentiometer.
Outer parts of the device are made of corrosion-resistance materials (plastic).
Measurement range:
10 ... 350° (dead zone 20° in the north)
Size: Ø 330 x 210 mm
Initial value: 1 m/s

Supply voltage:
1,5 W; maximum 1 mА
Interface: analog
Temperature range:
- 25 ... + 60°C, without ice
Connection: KaipoBase, KaipoRain
SPECIFICATION
TECHNICAL CHARACTERISTICS
Anemometer is an important meteorological device to measure the speed of air flows and their direction.
It is an essential device in plant growing to choose better dates of sowing, protection measures and harvesting.

Made of solid
material to guarantee long life time.
No special service 
Range of wind speed measurement:
1 ~ 79 m/s
Accuracy of wind speed measurement:
1 m/s  or ± 5%
Range of wind direction measurement:
0 ~ 360°
Accuracy of wind rotation: ± 7°

Initial wind speed: 1,5 m/s
Type of wind speed sensor: solid-state magnetic sensor
Type of wind direction sensor:
Wind and potentiometer
Type of cable: four-conductor cable,
26 AWG
Material: resistant to ultraviolet radiation ABS
Material:  policarbonate
Size:
470 × 191 × 121 mm
Connection: KaipoBase, KaipoRain
SPECIFICATION
TECHNICAL CHARACTERISTICS
A device to measure horizontal air flow in open condition, independent on wind direction.

Sensor is a small device; its body is made of synthetic material.
Measurement range: 0,9 ... 40 m/s
Size: Ø 134 x 175 mm

Accuracy:
± 0,5 m/s or ± 5% of measuring
Frequency: 0 ... 100 Hz
Interface: digital
Temperature range:
- 25 ... + 60°C
Connection: KaipoBase, KaipoRain
+7 918 96 95 888
+7 989 12 99 000
THE LATEST SMART SYSTEMS OF MONITORING WEATHER CONDITIONS 
Instagram: kaipos.ag
EN | RU
SPECIFICATION
TECHNICAL CHARACTERISTICS
Small rain sensor with patented electronic tipping bucket.

Safe, inexpensive sensor of high quality, ideal for small weather stations, control of irrigation humidity / soil moisture and measurement control of drain water in drip irrigation
Resolution: 1 mm
Accuracy:
± 5%
Supply voltage: 5 V
Supply current: 0
Interface: switching value
A
Temperature range:
0°C ~ + 70°C
Connection:
KaipoBase, KaipoRain, KaipoWave
SPECIFICATION
TECHNICAL CHARACTERISTICS
Precipitation and rain sensor with patented electronic tipping bucket.

Safe, inexpensive rain sensor of high quality, ideal for small weather stations and control of irrigation humidity / soil moisture
Resolution: 1 mm
Accuracy:
± 5%
Supply voltage: 5 V
Supply current: 0
Interface: switching value
A
Temperature range:
0°C ~ + 70°C
Connection:
KaipoBase, KaipoRain, KaipoWave
SPECIFICATION
TECHNICAL CHARACTERISTICS
Professional precipitation sensor with patented electronic tipping bucket.
One of the most accurate and reliable precipitation sensors. Ideal for small weather stations and control of irrigation humidity / soil moisture.

More accurate measurements
Only one adjusting screw allows to recalibrate a sensor easily.
Tipping bucket is made of specific material which doesn’t allow dust and mud to stick, it provides better water release.
Resolution:
0,1 mm. 0,2 mm, 0.25 mm, 0,5 mm
Accuracy: ± 5%
Supply voltage: 5 V
Supply current: 0
Interface: switching value
A
Temperature range:
0°C ~ + 70°C
Connection:
KaipoBase, KaipoRain, KaipoWave
TEMPERATURE AND RELATIVE HUMIDITY
ULTRAVIOLET SENSOR
PYRANOMETER
ULTRASONIC WIND SPEED AND WIND DIRECTION SENSOR
MECHANICAL WIND SPEED AND WIND DIRECTION SENSOR
MECHANICAL WIND DIRECTION SENSOR
MECHANICAL WIND DIRECTION SENSOR
SMALL RAIN SENSOR
PRECIPITATION AND RAIN SENSOR
PROFESSIONAL PRECIPITATION SENSOR
PRECIPITATION GAUGE
KaipoRHT
UF
Sp212
Windsonic
4.3140.51.010
KaipoWSD
4.3515.51.000
KaipoRG