SENSORS FOR AGROMODELS
Leaf wetness sensor is an electronic device consisting of a sensitive element in the form of a plant leaf; an electronic scheme; a communication cable with a controller and a bracket made of stainless steel which helps to attach the sensor in the foliage at different tilt angle. Physical contact with leaves is not necessary.
Measurement range: 0 ~ 20
(completely dry - completely wet)
Supply voltage:
3V ~ 5V
Measurement time: 5 m/s
Interface: analog
Temperature range:
- 35°C ~ + 70°C
Connection:
KaipoBase, KaipoRain, KaipoWave
Small sensor probe can measure absolute temperature of leaves. It has a clamp for stainless steel wire, blade diameter is measured with highly accurate electrothermal inductor.
Accuracy till
2mm.
Note: sensor may be unstable with water contact which is considered to be normal
Measurement range: 0 ~ 50℃
Size: 55 x 20 x 10
Accuracy: 0,1°C
Supply voltage:
AC220V 50Hz
Interface: analog
Temperature range:
- 30°C ~ + 70°C
Wire length: 3 m
Connection:
KaipoBase, KaipoRain, KaipoWave
The sensitive element is covered with anti-corrosion material allowing to protect from aggressive environment.
The sensor should be set near the plants opened for rain and dew interaction.
The sensor measures leaf wetness within 20 levels: 0 - completely dry, 20 - completely wet.
The sensor   ­­sets water presence on leaf surface at a definite time interval. This parameter is necessary
for calculating plant infection probability and for further control as well as for optimization of
agrotechnical measures on the field.
+7 918 96 95 888
+7 989 12 99 000
THE LATEST SMART SYSTEMS OF MONITORING WEATHER CONDITIONS 
Instagram: kaipos.ag
EN | RU
TEMPERATURE AND RELATIVE HUMIDITY
KaipoRHT
Highly accurate professional probe, ideal monitoring of environment
No special service
Low voltage and consumed power allow to connect this sensor to wireless sensor node KaipoWave.
Measurement range:
relative humidity
0.100%
temperature 50 .. + 100°C

Resolution:
relative humidity 0,1%
temperature 0,1%
Accuracy:
relative humidity
± 1%
temperature <± 0,1°C for the whole range
Supply voltage: 3V ~ 5V
Supply current: 4 mА

Interface: digital, analog
Connection:
KaipoBase, KaipoRain, KaipoWave
TECHNICAL CHARACTERISTICS
SPECIFICATION
SOIL TEMPERATURE
KaipoST

Soil temperature in  IP65 housing made of stainless steel. It can be used to measure temperature in soil, water or air
Measurement range: - 30°C ~ + 80°C
Size: 30 x 10 mm
Accuracy:
± 1°C
Supply voltage:
4,5 ~ 15  V direct current
Supply current: 4 ~ 20 mA
Interface: analog
Temperature range:
- 30°C ~ + 70°C
Connection:
KaipoBase, KaipoRain, KaipoWave
TECHNICAL CHARACTERISTICS
SPECIFICATION
ULTRAVIOLET SENSOR
100ST
SPECIFICATION
TECHNICAL CHARACTERISTICS
Sensor is designed to measure soil moisture in substrate and different soil types.
It is widely used to optimize any irrigation system.
Sensor measures water volume content using containers.
High measurement frequency minimizes salinity and textural effects, it makes sensor more accurate in a wide range of mineral soils.
Sensor is calibrated for most soil types.
Measurement range:
0% VWC until saturation
Size: 160x 33 x 8 mm
Accuracy:
3% VWC
Supply voltage: 3V ~ 5V
Interface:
analog, digital
Temperature range:
- 40°C ~ + 80°C
Supply current: 100 mA
Connection:
KaipoBase, KaipoRain, KaipoWave
PROFESSIONAL PRECIPITATION SENSOR
Professional precipitation sensor with patented electronic tipping bucket.
One of the most accurate and reliable precipitation sensors. Ideal for small weather stations and control of irrigation humidity / soil moisture.

More accurate measurements
Only one adjusting screw allows to recalibrate a sensor easily.
Tipping bucket is made of specific material which doesn’t allow dust and mud to stick, it provides better water release.
SPECIFICATION
TECHNICAL CHARACTERISTICS
Resolution:
0,1 mm. 0,2 mm, 0.25 mm, 0,5 mm
Accuracy: ± 5%
Supply voltage: 5 V
Supply current: 0
Interface: switching value
A
Temperature range:
0°C ~ + 70°C
Connection:
KaipoBase, KaipoRain, KaipoWave
PRECIPITATION GAUGE
KaipoRG
Ideal to measure parameters of hard, liquid and mixed precipitation
Small dimensions. Mechanical part consists of tipping bucket sensor for precipitation measurement.
Measuring part is protected from trash (insects, leaves, etc.), drops, etc.
No additional calibration. Resolution is 0,2 mm.
Sensor is designed according to the recommendations of the World meteorological organization.
It is necessary to clean the sensor regularly depending on environmental conditions. First, clean the funnel. Next, unscrew the nozzle, clean it and screw again.
Resolution: 0,2 mm
Accuracy: ± 4%
Supply voltage: 5 V
Supply current: 0
Interface: switching value
A
Temperature range:
0°C ~ + 70°C
Connection:
KaipoBase, KaipoRain, KaipoWave
TECHNICAL CHARACTERISTICS
SPECIFICATION
KaipoLTS
LEAF TEMPERATURE
LEAF WETNESS
KaipoLWS
SPECIFICATION
TECHNICAL CHARACTERISTICS
SPECIFICATION
TECHNICAL CHARACTERISTICS